Epoxy Safety Flooring For Laboratories From Tremco illbruck

Epoxy safety flooring for laboratories can often be a difficult choice. Many companies opt for safety vinyl but this can be costly, disruptive and may not last long. Once the chemicals and water often involved in laboratory work get under the edge of vinyl then deterioration of the adhesive beneath may occur resulting in bubbles and debonding.

There are a number of alternatives to this;

Tremco CS930 Surefoot is a lightly textured epoxy floor paint providing a non-slip surface with good general chemical resistance. The surface is similar to a piece of fine sandpaper.

Tremco CS900 Epoxicote combined with Tremco CS650 Antislip Aggregate is a grit textured high build epoxy coating with excellent chemical resistance. The surface is extremely slip resistant for ramps, steps, areas where wax is used or around machinery.

If you feel unable to install the products yourself call us and we will put you in touch with an installer.

Click the image below for the front page of the main site for further products or call 01942 251400 for information.