Floor paint specification for chemical resistance and extreme durability

Herewith a standard specification for installation of a floor coating system suitable to accept general chemicals and extremely heavy industrial forklift traffic. Anticipated wear life is 3-5 years. Please contact Tremco illbruck for details on specific chemicals.

1) The substrate should be mechanically prepared or have an open textured surface. The subfloor should be free of contamination and be of sound construction.

2) Apply a coat of Tremco CS900 Epoxicote by roller and allow to cure.

3) Apply a second coat of Tremco CS900 Epoxicote and allow to cure.

4) Optional antislip surface may be created by applying Tremco CS650 Antislip Aggregate into the wet surface. Note:- This is a 1mm sharp grit and may damage rubber forklift tyres. Used mainly on ramps, staircases, around machines etc.

This system will be suitable for foot traffic after overnight cure and full industrial traffic after two days cure at temperatures of 15°C plus. Leave the floor for 7 full days before exposing to chemicals.

Advantages

Solvent free and non-tainting. Tremendous value when calculating cost versus wear life in comparison to competitive products. Fast cure version available to allow two coats in one day at ambient temperatures.

Disadvantages

None.

Please view the product data sheet for the products by clicking on the links above.

Click the picture below for the main site to view all the products Tremco illbruck manufacture or call 01942 251400 for further information.